Blogger Jateng
Home / Shed Plans

Build Your Own 12x16 Lean To Shed with These Easy Plans

by admin Post a Comment

Build Your Own 12×16 Lean To Shed with These Easy Plans

Introduction


Are you in need of some extra space for storage or workspace? A 12×16 lean to shed may be just what you need! And the good news is, building it yourself is easier than you might think. With these easy plans, you can have your shed up and ready to use in no time.

Materials

  • building paper
  • roofing shingles
  • mason’s line and line level
  • 12 4x4x10′ treated posts
  • 36′ of 2×6 treated lumber
  • 48′ of 2×4 treated lumber
  • 55 6″ Timberlok screws
  • 12 8″ Timberlok screws
  • 80 3 1/2″ exterior screws
  • 1 box 16d galvanized nails
  • 4 door hinges and handle
  • 2 sheets 4’x8′ T1-11 siding

Tools

  • circular saw
  • miter saw
  • framing square
  • post hole digger
  • drill
  • 1/2″ drill bit
  • level
  • hammer

Instructions


Step 1: Lay out the posts


Using the mason’s line and line level, layout the location of the posts. Dig the post holes approximately 2 feet deep and 12 feet apart.

Step 2: Set the Posts


Set the 4×4 posts in the holes and using the framing square, make sure they are plumb and square. Brace the posts with scrap lumber and let stand for 24 hours.

Step 3: Install the Beams


Cut 6×6 beams to 12 feet in length. Set them on top of the posts, using the framing square to keep them level and square. Secure with Timberlok screws.

Step 4: Install the Joists


Cut 2×6 treated lumber to the length of the shed. Set them on the beams, spaced 16 inches apart. Secure with Timberlok screws.

Step 5: Install the Siding


Cut T1-11 siding to size and install with 3 1/2″ exterior screws.

Step 6: Install the Roof Sheeting


Install building paper to the roof. Install 2×4 purlins 16 inches on center. Then install the roofing shingles using roofing nails.

Step 7: Build the Door


Cut 2×4 lumber to build the door frame. Install T1-11 siding to the frame. Install the hinges and handle.

Step 8: Add the Finishing Touches


Add trim to the windows and door. Paint or stain the shed to protect it from the elements.

Conclusion


There you have it! Building your own 12×16 lean to shed may seem daunting at first, but with these easy plans and a little bit of hard work, you can have your own space for storage or workspace in no time. Don’t forget to make a material list and check it twice before heading to the store to purchase all of the needed items for your project. Happy building!

Link List:

  • Introduction
  • Materials
  • Tools
  • Instructions
    • Step 1: Lay out the posts
    • Step 2: Set the Posts
    • Step 3: Install the Beams
    • Step 4: Install the Joists
    • Step 5: Install the Siding
    • Step 6: Install the Roof Sheeting
    • Step 7: Build the Door
    • Step 8: Add the Finishing Touches
  • Conclusion

Related Searches
– Introduction
– Materials
– Tools
– Instructions
– Step 1: Lay out the posts
– Step 2: Set the Posts
– Step 3: Install the Beams
– Step 4: Install the Joists
– Step 5: Install the Siding
– Step 6: Install the Roof Sheeting
– Step 7: Build the Door
– Step 8: Add the Finishing Touches
– Conclusion

Post a Comment for "Build Your Own 12x16 Lean To Shed with These Easy Plans"